During a routine check of my Alfa’s exterior lighting, I discovered an inoperative right rear turn signal. Easy enough to change the bulb, I told myself, and removed that side’s tail lamp lens (4 Philips head screws, easily accessed). I have had the rear lenses apart before, several years ago, at which time I gave them a thorough cleaning. Then it occurred to me: I have never removed the front turn signal lenses. Even though all the front parking and signal lights worked, I decided that after 10+ years of ownership, it would be prudent to peek at those as well.

Here’s the thing about owning an older car (my Alfa will be 57 years old next year!): the list of preventative maintenance items never ends. I consider myself a good steward of the car, staying on top of fluid changes, brakes, tires, and various rubber bits. But the front lamps? Why did something so simple and so obvious escape my grasp? I have no excuse other than to rationalize that there was always something else that was a priority. So now was the time.

The front signal lenses were even easier to remove than the rears: just one Philips head screw. I pulled all the bulbs and was not surprised to observe that although functional, several of them had dark spots. They have all been in the car since at least 2013, the year it became mine, and how many years before that is anyone’s guess. Now I was ready to shop for bulbs.

They were all standard sizes: 1156, 1157, and 5007, front and rear. Ever so briefly did I consider going the LED route, but changed my mind, deciding that I didn’t want to tax the older wiring, or run into any overheating or physical interference issues. I checked online to explore my choices, and saw that Walmart had the best combination of brand, availability, and pricing. The front lenses are clear, and the 1156 bulbs for the turn signals were clear (white light), so the one upgrade I made was to swap in amber bulbs. The 4 packages of bulbs ran me around $12, and 48 hours after placing the order online, I drove to my local Walmart, pulled into one of their “online pickup” parking spots, called the phone number on the sign, and 5 minutes later, the bulbs were brought out to my car door.

Oh, the front signal lens gaskets: Without a doubt they were the ones that ‘Mario’ installed in March of ’67 as the car came down the Milano assembly line, as they crumbled in my hands. A plastic scraper removed the final traces of the old gaskets, and I placed an order with my #1 Alfa parts supplier, Classic Alfa in the UK, around 3 p.m. on Sunday afternoon. On Tuesday at 7 p.m. a DHL truck dropped the box on my front porch. This 48-hour turnaround is typical for them, and this, combined with the quality of their wares, is why they are my #1.

 

All the new Sylvania bulbs fit as expected and everything functioned on first try. I did not necessarily detect a substantial increase in brightness, but that was not the goal. I wanted new bulbs that would match left to right and would last for a few years. While working on the front end, I noticed (again, after 10 years of ownership) that the 2 headlight bulbs were from different manufacturers. I’ve never had the headlights out of the car, so back to the task of finding and ordering new bulbs. Amazon had Wagner sealed beam halogen bulbs and that’s what I bought. While the headlight bezels were off, I gave their undersides a quick coat of Rust-O-Leum paint to seal some minor rust, and polished the chrome which really spruced up the front of the car. Take a look at these before and after shots of the low beams and high beams:

 

 

Lesson learned! Modern cars spoil us with their state-of-the-art lighting (which in many cases require a complete assembly to be replaced if a lighting element fails). If you have a older car running incandescent bulbs, consider checking and replacing them with new, even if they are functional.

 

All photographs copyright © 2023 Richard A. Reina. Photos may not be copied or reproduced without express written permission.